UNIVOLT UTP-11 100W 38mm Solder Pot
The UNIVOLT UTP-11 Solder Pot is a compact, reliable solution for melting, tinning, and desoldering solder in electronics assembly and repair. Featuring a 100W heating element and a 38mm diameter pot, it reaches a maximum temperature of 450°C and can melt up to 300g of solder in just 5–15 minutes. Now with a 16A power plug, this pot is ready for reliable performance and enhanced safety in demanding environments. The unit features an adjustable temperature setting (approx. 200°C–450°C), ensuring precise control for consistent results and thermal safety.
Key Features:
-
Wide Temperature Setting: Adjustable from approximately 200°C to 450°C for versatile soldering and tinning applications.
-
Fast Melting Time: Reaches operational temperature and melts solder in just 5–15 minutes.
-
Practical Capacity: 300g max solder weight supports small to medium electronic jobs.
-
38mm Stainless Steel Pot: Compact size for minimal solder use and easy handling.
-
Integrated 16A Power Plug: Heavy-duty plug supports safe, high-current operation in industrial settings.
-
Safe and Reliable: Heavy base for stability, thermal cut-off for safety, and grounding connection for protection.
-
Technical Specifications:
Specification
Details
Model
UTP-11
Power
100W
Operating Voltage
220V AC
Power Plug
16A Heavy-duty plug
Max. Temperature
450°C
Melting Time
5-15 min
Max Solder Weight
300g
Pot Diameter
38mm
Temperature Setting
200°C–450°C adjustable
Material
Stainless Steel
Usage Instruction:
-
Initial heat-up best done at maximum, then dial to scale 4-6 for normal use
-
Add solder to the pot before powering on to avoid dry heating
-
Do not operate continuously on high temperature scale (6) for more than 5 hours
-
If pot fails to heat after power on, check and replace heating element as needed
-
Applications:
-
Wire Tinning for Harness Assembly: Dip stripped wire ends into molten solder for uniform tinning before crimping or screw termination—improves reliability in control panels and harnesses.
-
Desoldering and Salvaging Components: Remove multiple through-hole components from PCBs by heating the region and flooding with solder for easy extraction, frequently used in electronics repair shops.
-
Pre-tinning Terminals and Lugs: Prepare cable lugs and electrical terminals with a layer of solder for easier soldering onto cables in industrial or automotive electrical work.
-
Batch Processing of PCB Pins: Quickly tin or desolder mass pin headers and connectors during small-batch PCB rework or repair operations.
-
Solder Melting and Reclamation: Melt scrap solder for recycling or re-use in soldering operations, minimizing wastage and disposal.
-
Connector and Switch Prep: Tin the leads of switches, pushbuttons, and connectors before final assembly in factory or repair settings.
-
DIY Electronics Projects: For hobbyists needing quick, uniform tinning of multiple leads, wires, or small metal items.
-
What's Included In The Box
-
UNIVOLT UTP-11 Solder Pot
-
Printed manufacturer operating instructions
-